Level 3 Service

Level 3 Service: (Cost £110 including cables but excluding additional parts required for repair)

This is a full strip down service, useful if the bike is used in all weathers. All components are removed, cleaned and inspected to assess performance against original specification. Frame is checked for damage or ingress of water before the bike is re-assembled and set up to specification.


  1. Check all fixing bolts are secure and to the correct torque where applicable (essential with a carbon frame or components).
  2. Visual inspection of tyres and wheel rims for signs of damage or excessive wear.
  3. Check headset for correct adjustment.
  4. Check gears for accuracy of shifting between cogs, and condition of cables.
  5. Check drivetrain components for wear.
  6. Remove bottom bracket and inspect for wear. Re-assemble and adjust.
  7. Check operation and setting of brakes including pad wear and condition of cables.
  8. Check front and rear wheel hubs, clean bearings and cups, adjust cones and axle.
  9. Check spoke tensions in both wheels.
  10. True and dish front and rear wheels
  11. Inspect frame for damage or ingress of water.
  12. Assess condition of cables for gears and brakes (inner and outer).
  13. Lubricate all pivot points on drivetrain components and brake calipers.
  14. Test ride to check the performance.


Customers will be advised of any issues found during the service that will require attention immediately, or in the near future.

Any additional work carried out will be charged as a labour cost plus parts.